The Master F 80 is a stationery indirect oil-fired (diesel, kerosene) air heater. Boasting a room thermostat, a high-capacity fuel tank and a 4-sided supply air plenum, the F 80 is intended for use in commercial and industrial spaces. 

Indirect heating

Indirect heating separates the combustion and air-heating processes. The result, therefore, is clean hot air, free of combustion by-products such as carbon dioxide and, potentially, carbon monoxide. Compared to direct fuel-burning heaters, therefore, the F 80 can be used internally, in enclosed spaces.

Stainless steel combustion chamber

Burning fuel in a separate combustion chamber, this chamber is manufactured using stainless steel. Stainless steel is both highly conductive and strong. This means it heats up quickly and to high temperatures, maximising heat transfer to the air that will be circulated into the space you want warming up.

Exhaust Flue

Being an indirect heater, the Master F 80 is best used with a flue. This flue can then be fitted to port exhaust to a location where it can disperse.

High fuel capacity and autonomy

Being a stationary heater, the Master F 80 can afford a larger fuel tank. Sporting a 110L tank, it burns 6.32 litres of fuel per hour. This means the Master F 80 could run non-stop for 17 hours before needing a refill.

Thermostatic controls

While the thermostat is primarily there to help you conveniently regulate the temperature of a space, the added bonus of this feature is extended running times before fuel refills.

Maximum Heat Output

The Master F 80 generates a whopping 79.88kW of heat energy at an airflow rate of 7800m3 an hour. Dantherm, therefore, recommends this heater for premises up to a whopping 2000m3.

4-sided air plenum

Propelling heated air out the top part of the heater, the F 80 boasts omnidirectional heat output. In other words, the heat comes out in all directions, on all sides. However, should you want the heat to be more directional, the vents can be pushed closed on various sides.

Summer Ventilation

The problem with many warehouses and other, similar, commercial and industrial buildings is that they generally reflect the climate. They are as hot on summer days as they are cold on winter days. 

Fortunately, alongside its primary function as a heater, the Master F 80 also has a summer setting. The summer setting isolates the fan function, getting air moving.

How do I get one of these fabulous heaters?

The Master F 80 is a high-powered, stationary and indirect air heater. Manufactured for regulating temperatures in warehouses, workshops, greenhouses and livestock buildings. 

If you would like to find out more/enquire about the F 80, or our wider range of heaters, please get in touch via phone at (01652) 659759, the messenger icon (right below) or via our contact form.

Features

• Large built-in oil tank
• Integrated burner with electronic flame control and photocell cut-off
• Fan limit thermostat with automatic reset
• Summer/winter switch for ventilation only
• Centrifugal fan
• Stainless steel combustion chamber
• High-efficiency dual-circuit heat exchanger
• Wide inspection doors for easy cleaning
• Built-in thermostat

Specification